Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D6267-08

Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures D6267-08 ASTM|D6267-08|en-US Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures Standard new BOS Vol. 06.03 Committee D01
$ 73.00 In stock

Significance and Use

This test method is used to measure the apparent viscosity of hydrocarbon resins at elevated temperatures. Elevated temperature viscosity values of a hydrocarbon resin may be related to the properties of coatings, adhesives and the like, containing such a resin.

For hydrocarbon resins, values of apparent viscosity will usually be a function of shear rate under the conditions of test. Although the type of viscometer described in this test method operates under conditions of relatively low shear rate, shear rate depends on the spindle and rotational speed selected for a determination; therefore, comparisons between apparent viscosity values should be made only for measurements made with similar viscometers under conditions of equivalent shear rate.

Scope

1.1 This test method covers the determination of the apparent viscosity of hydrocarbon resins having apparent viscosities up to 2,000,000 millipascal seconds (mPa·s) (Note 1) at temperatures up to 300°C (572°F).

Note 1—The SI unit of (dynamic) viscosity is the pascal second. The centipoise (cP) is one millipascal second (mPa·s) and is frequently used as a viscosity unit.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.03
Developed by Subcommittee: D01.34
Pages: 4
DOI: 10.1520/D6267-08
ICS Code: 83.080.20