Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D5971-01

Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material D5971-01 ASTM|D5971-01|en-US Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material Standard new BOS Vol. 04.09 Committee D18
$ 73.00 In stock

Significance and Use

This practice shall be used to provide a representative sample of the material for the purpose of testing various properties. The procedures used in sampling shall include the use of every precaution that will assist in obtaining samples that are truly representative of the nature and condition of the CLSM.

Note 2—The quality of the result produced by this standard is dependent on the competence of the personnel performing it and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing/sampling/inspection/ and the like. Users of this standard are cautioned that compliance with Practice D 3740 does not in itself assure reliable results. Reliable results depend on many factors. Practice D 3740 provides a means of evaluating some of these factors.

Scope

1.1 This practice explains the procedure for obtaining a representative sample to test of freshly mixed controlled low strength material (CLSM) as delivered to the project site (Note 1). This practice includes sampling from revolving-drum truck mixers and from agitating equipment used to transport central-mixed CLSM.

1.2 The values stated in SI units are to be regarded as the standard. The inch-pound equivalents are shown for information only.

Note 1—Composite samples are required by this practice unless specifically excepted by procedures governing the tests to be performed, such as tests to determine uniformity of consistency and mixer efficiency. Procedures used to select the specific test batches are not described in this practice. It is recommended that random sampling be used to determine overall specification compliance.

<>

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a projects many unique aspects. The word "standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.09
Developed by Subcommittee: D18.15
Pages: 2
DOI: 10.1520/D5971-01
ICS Code: 19.020