Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM D5827-95

Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography D5827-95 ASTM|D5827-95|en-US Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography Standard new BOS Vol. 15.05 Committee D15
$ 75.00 In stock

Scope

1.1 This test method covers the chemical analysis of engine coolant for chloride ion by high-performance ion chromatography (HPIC). Several other common anions found in engine coolant can be determined in one chromatographic analysis by this test method.

1.2 This test method is applicable to both new and used engine coolant.

1.3 Coelution of other ions may cause interferences for any of the listed anions. In the case of unfamiliar formulations, identification verification should be performed by either or both fortification and dilution of the sample matrix with the anions of interest.

1.4 Analysis can be performed directly by this test method without pretreatment, other than dilution, as required by the linear ranges of the equipment. Table 1 indicates several applicable anions and approximate detection limits.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 15.05
Developed by Subcommittee: D15.04
Pages: 5
DOI: 10.1520/D5827-95