Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D5341-99(2010)

Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) D5341-99R10 ASTM|D5341-99R10|en-US Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) Standard new BOS Vol. 05.06 Committee D05
$ 73.00 In stock

Significance and Use

When coke lumps descend in the blast furnace, they are subjected to reaction with countercurrent CO2 and to abrasion as they rub together and against the walls of the furnace. These concurrent processes physically weaken and chemically react with the coke lumps, producing an excess of fines that can decrease burden permeability and result in increased coke rates and lost hot metal production. This test method is designed to measure indirectly this behavior of coke in the blast furnace.

Scope

1.1 This test method, patterned after the Nippon Steel test procedure, describes the equipment and techniques used for determining lump coke reactivity in carbon dioxide (CO2) gas at elevated temperatures and its strength after reaction in CO2 gas by tumbling in a cylindrical chamber referred to as an I-tester.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 05.06
Developed by Subcommittee: D05.15
Pages: 4
DOI: 10.1520/D5341-99R10