Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D4895-04

Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion D4895-04 ASTM|D4895-04|en-US Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion Standard new BOS Vol. 08.02 Committee D20
$ 83.00 In stock

Abstract

This specification covers dry-powder resins of polytetrafluoroethylene (PTFE) resin produced from dispersion. PTFE mixtures with additives are not covered in this specification. This specification covers type I and type II PTFE. The resins shall be tested for bulk density, particle size, water content, melting peak temperature, tensile strength, elongation at break, standard specific gravity, extrusion pressure, thermal instability index, and stretching void index. Specimen preparation, testing, inspection, and packaging shall be in accordance to the procedures indicated in this specification.

Scope

1.1 This specification covers dry-powder resins of polytetrafluoroethylene (PTFE) that have been prepared from dispersions of PTFE by manufacturing techniques that involve controlled coagulation of the dispersion. These resins are generally known as "fine-powder" resins or "coagulated-dispersion powder" resins. The conversion of these resins to finished products normally involves a process called "paste extrusion," and sometimes involves formative processes such as calendering. A volatile liquid is present as a processing aid during these formative stages of conversion, and is subsequently removed during the finishing stages of conversion. These PTFE resins are homopolymers of tetrafluoroethylene, or, in some cases, modified homopolymers containing not more than 1 % by weight of other fluoromonomers. The usual methods of processing thermoplastics generally are not applicable to these materials because of their viscoelastic properties. The materials covered herein do not include mixtures of PTFE with additives such as colors, fillers, or plasticizers; nor do they include reprocessed or reground resin or any fabricated articles because the properties of such materials have been irreversibly changed when they were fibrillated or sintered. The methods and properties included are those required to identify the various resins. An additional procedure is provided in the appendix for further characterization of the resins.

1.2 The values stated in SI units as detailed in IEEE/ASTM SI 10 are to be regarded as standard. The values given in brackets are for information only.

1.3 The following safety hazards caveat pertains only to the Specimen Preparation Section, Section 9, and the Test Methods Section, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Warning note in for a specific hazards statement.

Note 1—Information in this specification is technically equivalent to related information in ISO 12086-1 and ISO 12086-2.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.02
Developed by Subcommittee: D20.15
Pages: 14
DOI: 10.1520/D4895-04
ICS Code: 83.080.10