Standard Historical Last Updated: Jun 15, 2011 Track Document
ASTM D4489-95(2006)

Standard Practices for Sampling of Waterborne Oils

Standard Practices for Sampling of Waterborne Oils D4489-95R06 ASTM|D4489-95R06|en-US Standard Practices for Sampling of Waterborne Oils Standard new BOS Vol. 11.02 Committee D19
$ 66.00 In stock

Significance and Use

Identification of the source of a spilled oil is established by comparison with known oils selected because of their possible relationship to the spill, that is, potential sources. Generally, the suspected source oils are from pipelines, tanks, etc., and therefore pose little problems in sampling compared to the spilled oil. This practice addresses the sampling of spilled oils in particular, but could be applied to appropriate source situations, for example, a ship’bilge.

Scope

1.1 These practices describe the procedures to be used in collecting samples of waterborne oils (see Practice D 3415), oil found on adjoining shorelines, or oil-soaked debris, for comparison of oils by spectroscopic and chromatographic techniques, and for elemental analyses.

1.2 Two practices are described. Practice A involves "grab sampling" macro oil samples. Practice B can be used to sample most types of waterborne oils and is particularly applicable in sampling thin oil films or slicks. Practice selection will be dictated by the physical characteristics and the location of the spilled oil. These two practices are:

Sections
Practice A (for grab sampling thick layers of oil, viscous oils or oil soaked debris, oil globules, tar balls, or stranded oil) to
Practice B (for TFE-fluorocarbon polymer strip samplers) to

1.3 Each of the two practices is designed to collect oil samples with a minimum of water, thereby reducing the possibility of chemical, physical, or biological alteration by prolonged contact with water between the time of collection and analysis.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 7.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 11.02
Developed by Subcommittee: D19.06
Pages: 3
DOI: 10.1520/D4489-95R06
ICS Code: 75.040