Standard Historical Last Updated: Jun 05, 2015 Track Document
ASTM D2997-01(2007)e1

Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe D2997-01R07E01 ASTM|D2997-01R07E01|en-US Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Standard new BOS Vol. 08.03 Committee D20
$ 83.00 In stock

Abstract

This specification covers machine-made glass-fiber-reinforced thermosetting-resin pressure pipe manufactured by the centrifugal casting process. Pipe covered by this specification has been found suitable for conveying gases, petroleum products, or corrosive fluids. For the purposes of this standard, polymer does not include natural polymers. Pipe meeting this specification shall be categorized by the prescribed long-term static or cyclic hydrostatic design basis when tested. Additionally, the pipe shall meet the applicable cell limit requirements for short-term rupture strength, longitudinal tensile strength, tensile modulus, and pipe stiffness.

Scope

1.1 This specification covers machine-made glass-fiber-reinforced thermosetting-resin pressure pipe manufactured by the centrifugal casting process. Included are a classification system and requirements for materials, mechanical properties, dimensions, performance, test methods, and marking.

Note 1—The term "fiberglass pipe" as described in Section 3 applies to both reinforced thermosetting resin pipe (RTRP) and reinforced polymer mortar pipe (RPMP).

Note 2—Pipe covered by this specification has been found suitable for conveying gases, petroleum products, or corrosive fluids.

Note 3—For the purposes of this standard, polymer does not include natural polymers.

1.2 The values given in parentheses are for information only.

Note 4—There is no known ISO equivalent to this standard.

1.3 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.03
Developed by Subcommittee: D20.23
Pages: 5
DOI: 10.1520/D2997-01R07E01
ICS Code: 23.040.20