Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM D2433-93(2002)

Standard Test Methods for Rubber Thread

Standard Test Methods for Rubber Thread D2433-93R02 ASTM|D2433-93R02|en-US Standard Test Methods for Rubber Thread Standard new BOS Vol. 09.02 Committee D11
$ 75.00 In stock


1.1 These test methods cover the testing of both round extruded latex and rectangular cut rubber thread products in which the base material used in manufacture may be natural rubber or synthetic rubber, alone or in combination. These tests are to be made only on the bare uncovered rubber thread.

1.2 Owing to the comparatively small cross section of the material and also because of the unusual conditions of service of this material, certain special test methods have been developed and take the place of the tests for other rubber products.

1.3 Comparisons may only be made on new rubber threads or those of identical processing histories. In the interpretation of results from threads which have been subjected to spooling, fabrication, or other process, the previous history is important, and what is known of this and any relaxation treatments used should be stated.

1.4 The test methods appear in the following sections:

Density 7-11
Count 12-16
Metric Yield (Length per Unit Weight)17-19
Tensile Strength20-22
Elongation at Break 23 and 24
Stress at Predetermined Elongation 25-27
Elongation Under Fixed Force (Method A)28-30
Elongation Under Fixed Force (Method B)31-34
Stress Retention35-39

1.5 >This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Book of Standards Volume: 09.02
Developed by Subcommittee: D11.37
Pages: 6
DOI: 10.1520/D2433-93R02
ICS Code: 83.060