Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D1203-94(2003)

Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods D1203-94R03 ASTM|D1203-94R03|en-US Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods Standard new BOS Vol. 08.01 Committee D20
$ 73.00 In stock

Significance and Use

The test methods are intended to be rapid empirical tests which may be useful in the relative comparison of materials having the same nominal thickness.

Note 2—When the plastic material contains plasticizer, loss from the plastic is assumed to be primarily plasticizer. The effect of moisture is considered to be negligible.

Correlation with ultimate application for various plastic materials should be determined by the user. To obtain accelerated tests that more nearly approach actual service conditions, reference should be made to Specification E 197.

Scope

1.1 These test methods cover the determination of volatile loss from a plastic material under defined conditions of time and temperature, using activated carbon as the immersion medium.

1.2 Two test methods are covered as follows:

1.2.1 Test Method A, Direct Contact with Activated Carbon—In this test method the plastic material is in direct contact with the carbon. This test method is particularly useful in the rapid comparison of a large number of plastic specimens.

1.2.2 Test Method B, Wire Cage—This test method prescribes the use of a wire cage, which prevents direct contact between the plastic material and the carbon. By eliminating the direct contact, the migration of the volatile components to the surrounding carbon is minimized and loss by volatilization is more specifically measured.

1.3 The values stated in SI units are to be regarded as the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—This standard is similar in content (not technically equivalent) to ISO 176-1976(E).

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.01
Developed by Subcommittee: D20.15
Pages: 3
DOI: 10.1520/D1203-94R03
ICS Code: 83.080.01