Standard Historical Last Updated: Jul 12, 2021
ASTM D143-14

Standard Test Methods for Small Clear Specimens of Timber

Significance and Use

4.1 These test methods cover tests on small clear specimens of wood that are made to provide the following:

4.1.1 Data for comparing the mechanical properties of various species,

4.1.2 Data for the establishment of correct strength functions, which in conjunction with results of tests of timbers in structural sizes (see Test Methods D198 and Test Methods D4761), afford a basis for establishing allowable stresses, and

4.1.3 Data to determine the influence on the mechanical properties of such factors as density, locality of growth, position in cross section, height of timber in the tree, change of properties with seasoning or treatment with chemicals, and change from sapwood to heartwood.

Scope

1.1 These test methods cover the determination of various strength and related properties of wood by testing small clear specimens.

1.1.1 These test methods represent procedures for evaluating the different mechanical and physical properties, controlling factors such as specimen size, moisture content, temperature, and rate of loading.

1.1.2 Sampling and collection of material is discussed in Practice D5536. Sample data, computation sheets, and cards have been incorporated, which were of assistance to the investigator in systematizing records.

1.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. When a weight is prescribed, the basic inch-pound unit of weight (lbf) and the basic SI unit of mass (Kg) are cited.

1.2 The procedures for the various tests appear in the following order:

 

Sections

Photographs of Specimens

 5

Control of Moisture Content and Temperature

 6

Record of Heartwood and Sapwood

 7

Static Bending

 8

Compression Parallel to Grain

 9

Impact Bending

10

Toughness

11

Compression Perpendicular to Grain

12

Hardness

13

Shear Parallel to Grain

14

Cleavage

15

Tension Parallel to Grain

16

Tension Perpendicular to Grain

17

Nail Withdrawal

18

Specific Gravity and Shrinkage in Volume

19

Radial and Tangential Shrinkage

20

Moisture Determination

21

Permissible Variations

22

Calibration

23


1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.10
Developed by Subcommittee: D07.01
Pages: 31
DOI: 10.1520/D0143-14
ICS Code: 79.040