Standard Historical Last Updated: Feb 23, 2015 Track Document
ASTM C1540-11

Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings C1540-11 ASTM|C1540-11|en-US Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings Standard new BOS Vol. 01.02 Committee A04
$ 75.00 In stock

Abstract

This specification covers the performance evaluation of heavy duty shielded couplings to join hubless cast iron soil pipe and fittings. Physical properties of all stainless steel and gaskets shall comply with the specified values. Requirements for the elastomeric gasket, clamp assembly, and couplings such as coupling width are detailed. The test apparatus for deflection test, shear test, and unrestrained hydrostatic joint test are illustrated.

Scope

1.1 This specification covers the evaluating of the performance of heavy duty shielded couplings to join hubless cast iron soil pipe and fittings.

1.2 Couplings covered by this standard shall have minimum dimensions as found in Table 1 and Fig. 1 of this standard.

1.3 The committee with jurisdiction over this standard is aware of comparable standards published by other organizations, namely Cast Iron Soil Pipe Institute specification CISPI-310 and Factory Mutual Research standard FM 1680.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TABLE 1

Nominal Pipe SizeCoupling Width
1½ to 4 in. (38 to 100 mm)3 in. (76 mm) Minimum Width
5 to 10 in. (127 to 254 mm)4 in. (100 mm) Minimum Width
12 to 15 in. (305 to 381 mm)5½ in. (140 mm) Minimum Width

FIG. 1 Typical Center Stop Detail

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.02
Developed by Subcommittee: A04.75
Pages: 5
DOI: 10.1520/C1540-11
ICS Code: 23.040.60