Standard Historical Last Updated: Jun 22, 2011 Track Document
ASTM C1372-09

Standard Specification for Dry-Cast Segmental Retaining Wall Units

Standard Specification for Dry-Cast Segmental Retaining Wall Units C1372-09 ASTM|C1372-09|en-US Standard Specification for Dry-Cast Segmental Retaining Wall Units Standard new BOS Vol. 04.05 Committee C15
$ 73.00 In stock

Abstract

This specification covers drycast segmental retaining wall units of concrete, machinemade from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. The units are intended for use in the construction of mortarless segmental retaining walls. The material composition of retaining wall units consists of cementitious materials like portland cement and its modified form, limestone, hydraulic cement, blended hydraulic cement, pozzolans, blast furnace slag cement, aggregates, and other constituents which include air-entraining agents, coloring pigments, integral water repellents, and finely ground silica. All units shall be sound and free of cracks or other defects that interfere with the proper placement of the unit or significantly impair the strength or permanence of the construction.

Scope

1.1 This specification covers dry-cast segmental retaining wall units of concrete, machinemade from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. The units are intended for use in the construction of mortarless segmental retaining walls.

Note 1—When particular features are desired, such as weight classification, higher compressive strength, surface texture, finish, color, or other special features, such properties should be specified separately by the purchaser. Local suppliers should be consulted as to availability of units having the desired features.

1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.05
Developed by Subcommittee: C15.03
Pages: 3
DOI: 10.1520/C1372-09
ICS Code: 91.060.10