Standard Historical Last Updated: Jul 14, 2014 Track Document
ASTM C1311-10

Standard Specification for Solvent Release Sealants

Standard Specification for Solvent Release Sealants C1311-10 ASTM|C1311-10|en-US Standard Specification for Solvent Release Sealants Standard new BOS Vol. 04.07 Committee C24
$ 73.00 In stock

Significance and Use

This specification describes solvent release sealants for general caulking and sealing operations in building construction. However, it should be recognized by the user that not all sealants meeting this specification are suitable for all applications and all substrates and that there is no implication that the sealants are equivalent in all physical properties.

Refer to Guide C1193 for information on the proper use of sealants meeting this specification.

Abstract

This specification describes the properties of one-component solvent release sealants for use in building construction. These sealants are generally formulated to withstand a specified maximum joint movement in extension and compression of the nominal joint width. The sealants shall be tested, and is expected to conform to the following physical properties: extrudability after aging, shore A hardness, indentation hardness, bubbling, adhesive and cohesive loss after cyclic movement, slump, stain index, tack-free time, and accelerated weathering (edge cracking, center cracking, adhesion loss, and color change).

Scope

1.1 This specification describes the properties of a one-component solvent release sealant for use in building construction. These sealants are generally formulated to withstand a maximum joint movement of 7.5 % in extension and 7.5 % in compression of the nominal joint width.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 The committee with jurisdiction of this specification is not aware of any similar specification within ISO or any other organization.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.07
Developed by Subcommittee: C24.10
Pages: 3
DOI: 10.1520/C1311-10
ICS Code: 91.100.50