Standard Active Last Updated: Sep 27, 2021 Track Document
ASTM C1258-21a

Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation C1258-21A ASTM|C1258-21A|en-US Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation Standard new BOS Vol. 04.06 Committee C16
$ 61.00 In stock

Significance and Use

5.1 On systems operating at sub-ambient temperature, humid ambient conditions cause a vapor driving force toward the insulation. If not retarded, the driven moisture vapor is detrimental to the insulation's thermal resistance. A vapor retarder must resist degradation in order maintain its resistance to vapor passage. Degradation in this test method is induced by elevated temperature and humidity conditions.

Scope

1.1 This test method covers the determination of the resistance of flexible low permeance vapor retarders for thermal insulation as classified in Specification C1136 to elevated temperature and humidity. Water vapor permeance measurement and visual inspection after exposure at elevated temperature and humidity are used to assess vapor retarder response.

1.2 Typical vapor retarders evaluated in this test method are intended for indoor use and include foil-scrim-kraft laminates, metallized polyester-scrim-kraft laminates, treated fabrics, treated papers, films, foils, or combinations of these materials that comprise a vapor retarder material. This test method is not intended for assessment of the liquid-applied coatings, sealants, or mastics commonly used with insulation products.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.06
Developed by Subcommittee: C16.33
Pages: 2
DOI: 10.1520/C1258-21A
ICS Code: 91.100.50