Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM C503-08

Standard Specification for Marble Dimension Stone

Standard Specification for Marble Dimension Stone C0503-08 ASTM|C0503-08|en-US Standard Specification for Marble Dimension Stone Standard new BOS Vol. 04.07 Committee C18
$ 66.00 In stock

Abstract

This specification covers the material characteristics, physical requirements, and sampling method appropriate to the selection of marble dimension stone for general building and structural purposes. Dimension marble shall include stone that is sawed, cut, split, or otherwise finished or shaped into blocks, slabs or tiles, and shall specifically exclude molded, cast and artificially aggregated units composed of fragments, and also crushed and broken stone. Marbles covered here are classified as either calcite or dolomite. The physical property requirements to which marble stones shall adhere to are absorption by weight, density, compressive strength, modulus of rupture, abrasion resistance, and flexural strength.

Scope

1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of marble for general building and structural purposes. Refer to Guides C 1242 and C 1528 for the appropriate selection and use of marble dimension stone.

1.2 Dimension marble shall include stone that is sawed, cut, split, or otherwise finished or shaped into blocks, slabs or tiles, and shall specifically exclude molded, cast and artificially aggregated units composed of fragments, and also crushed and broken stone.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.07
Developed by Subcommittee: C18.03
Pages: 3
DOI: 10.1520/C0503-08
ICS Code: 91.100.15