Standard Historical Last Updated: May 03, 2023 Track Document
ASTM B121/B121M-16

Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar B0121_B0121M-16 ASTM|B0121_B0121M-16|en-US Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar Standard new BOS Vol. 02.01 Committee B05
$ 61.00 In stock

Abstract

This specification establishes the requirements leaded brass plates, sheets, strips, and rolled bars made from UNS C33500, C34000, C34200, C34000, C35000, C35300, or C35600 copper-zinc-lead alloys. Each product should be manufactured by hot or cold working, and annealed if required, to produce a uniform wrought structure that meets the specified temper properties. This specification also contains information on the standard tempers of rolled and annealed materials as well as the required tensile strength, Rockwell hardness, and grain sizes. The Rockwell hardness test can be used to test for general conformity to the specification requirements for temper, tensile strength and grain size.

Scope

1.1 This specification establishes the requirements for leaded brass plate, sheet, strip, and rolled bar. The following alloys are covered:

 

 

Nominal Composition, %

Copper Alloy

Previously Used

 

UNS No.2

Designation

Copper

Zinc

Lead

Iron

 

 

 

 

 

 

C33500

2

63.5

36.0

0.5

...

C34000

3

63.5

35.5

1.0

...

C34200

5

63.5

34.5

2.0

...

C35000

...

61.5

37.4

1.1

...

C35300

4

61.5

36.7

1.8

...

C35600

6

61.5

36.0

2.5

...

1.2 Units—Values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 02.01
Developed by Subcommittee: B05.01
Pages: 4
DOI: 10.1520/B0121_B0121M-16
ICS Code: 77.150.30