Standard Historical Last Updated: May 13, 2019 Track Document
ASTM B75/B75M-11

Standard Specification for Seamless Copper Tube

Standard Specification for Seamless Copper Tube B0075_B0075M-11 ASTM|B0075_B0075M-11|en-US Standard Specification for Seamless Copper Tube Standard new BOS Vol. 02.01 Committee B05
$ 83.00 In stock

Abstract

This specification establishes the requirements for seamless round, rectangular, and square copper tube suitable for general engineering applications. The tube shall be manufactured by such hot- and cold-working processes as to produce a homogeneous, uniform wrought structure in the finished product. It shall be cold drawn to the finished size and wall thickness. The requirements and size availability of tube in the tempers shall conform to the specified requirements. Tensile and yield strength test, Rockwell hardness test, expansion test, microscopical examination, hydrogen embrittlement, electromagnetic test, hydrostatic pressure test, pneumatic pressure test, electrical resistivity, and chemical composition shall be made to conform to specified requirements.

Scope

1.1 This specification establishes the requirements for seamless round, rectangular, and square copper tube suitable for general engineering applications.

1.1.1 Tubes made from any of the following Copper UNS No. designations shall be supplied unless otherwise specified in the contract or purchase order:

Copper UNS No.Type of Copper
C10100Oxygen-free electronic
C10200Oxygen-free without residual deoxidants
C10300Oxygen-free, extra low phosphorus
C10800Oxygen-free, low phosphorus
C12000Phosphorus deoxidized, low residual phosphorus
C12200Phosphorus deoxidized, high residual phosphorus

1.2 UnitsThe values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following hazard statement pertains only to the test methods described in Sections 20.5.2.1, 21.2.9, and 21.2.10 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 02.01
Developed by Subcommittee: B05.04
Pages: 8
DOI: 10.1520/B0075_B0075M-11
ICS Code: 77.150.30