Standard Historical Last Updated: Oct 17, 2022 Track Document
ASTM B5-16

Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes B0005-16 ASTM|B0005-16|en-US Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes Standard new BOS Vol. 02.01 Committee B05
$ 75.00 In stock

Significance and Use

14.1 Calculated values shall be rounded to the specified number of places in accordance with Practice E29.

Abstract

This specification establishes the requirements for high conductivity, tough-pitch, copper wire bars, cakes, slabs, billets, ingots, and ingot bars. Copper wires under this specification include UNS C113000, C11400, C11500 and C11600, C12000, C12200, C12300, and C14500. The maximum values of mass resistivity for wire bars, cakes, slabs, and billets, for electrical use and for other uses, shall conform to the specified requirements. Samples for the electrical resistivity test of electrolytic copper, electrorefined copper, electrowon copper, and fire-refined copper shall be fabricated into a rod. The external oxide shall be removed, the rod cold drawn into a wire of a specific diameter, and cut into sampling lengths. The resulting specimen shall be annealed and quickly cooled in an inert atmosphere. The mean resistivity shall be determined as the mean of the observations from the test on the wires.

Scope

1.1 This specification establishes the requirements for high conductivity, tough-pitch, copper wire bars, cakes, slabs, billets, ingots, and ingot bars.

1.2 Copper under this specification corresponds to the designations “ETP” (UNS C11000) and “FRHC” (UNS C11020) as shown in Classification B224. These coppers may also be used to produce coppers corresponding to the following:

Copper UNS No.

Classification B224 Designation

 

C11300, C11400, C11500, and C11600

STP  

C12000

DLP 

C12200

DHP 

C12300

DHPS

C14520

DPTE

1.3 Although this specification includes certain UNS designations as described in Practice E527, these designations are for cross reference only and are not specification requirements. Therefore, in case of conflict, this ASTM specification shall govern.

1.4 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4.1 Exception—Electrical resistivity is expressed in SI units.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 02.01
Developed by Subcommittee: B05.07
Pages: 5
DOI: 10.1520/B0005-16
ICS Code: 77.150.30