Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM A1016/A1016M-04a

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes A1016_A1016M-04A ASTM|A1016_A1016M-04A|en-US Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes Standard new BOS Vol. 01.01 Committee A01
$ 83.00 In stock

Abstract

This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength tests and elongation tests shall be made to conform to the requirements. Flattening test, reverse flattening test, reverse bend test, flaring test, flange test, hardness test, ultrasonic test, eddy current test, flux leakage test, and hydrostatic test shall be made to conform to the requirements specified.

Scope

1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.

Title of SpecificationASTM Designation
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes A 209/A 209M
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger TubesA 213/A 213M
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser TubesA 249/A 249M
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater TubesA 250/A 250M
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General ServiceA 268/A 268M
Seamless and Welded Austenitic Stainless Steel Tubing for General Service A 269
Seamless and Welded Austenitic Stainless Steel Sanitary TubingA 270
Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service A 334/A 334M
Seamless and Electric-Welded Low-Alloy Steel TubesA 423/A 423M
Welded Austenitic Stainless Steel Feedwater Heater TubesA 688/A 688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core Components A 771
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General ServiceA 789/A 789M
Welded Ferritic Stainless Steel Feedwater Heater TubesA 803/A 803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder Reactor Core ComponentsA 826
High-Frequency Induction Welded, Unannealed Austenitic Steel Condenser Tubes A 851
These designations refer to the latest issue of the respective specifications.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each System must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.01
Developed by Subcommittee: A01.10
Pages: 11
DOI: 10.1520/A1016_A1016M-04A
ICS Code: 77.140.20