Standard Active Last Updated: Mar 08, 2022 Track Document
ASTM A952/A952M-02(2022)

Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links A0952_A0952M-02R22 ASTM|A0952_A0952M-02R22|en-US Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links Standard new BOS Vol. 01.05 Committee A01
$ 69.00 In stock

Abstract

This specification covers forged alloy steel lifting components and welded coupling and master links for Grade 80 and Grade 100 alloy chain slings. The steel materials shall be melt processed either by electric process or oxygen blown process. The steel shall be fully killed and shall conform to the required austenitic grain size. Product analysis shall be performed on and the steel specimens shall conform to the required chemical compositions of nickel, chromium, molybdenum, phosphorus and sulfur. Proof tests shall be performed and the materials shall conform to the required values of working load and breaking force. Deformation test, breaking force test and fatigue test shall be performed on the steel materials.

Scope

1.1 This specification covers the requirements for forged alloy steel lifting components and welded coupling and master links for Grade 80 and Grade 100 alloy chain slings as described in Specification A906/A906M.

1.2 Two grades of components and welded links are covered:

1.2.1 Grade 80.

1.2.2 Grade 100.

1.3 This specification is a performance standard. Other standards apply to use of these products. Some of these standards are: OSHA 1910.184, ASME B30.9, and ASME B30.10.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.05
Developed by Subcommittee: A01.27
Pages: 7
DOI: 10.1520/A0952_A0952M-02R22
ICS Code: 53.020.01; 77.140.20