Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM A861-01

Standard Specification for High-Silicon Iron Pipe and Fittings

Standard Specification for High-Silicon Iron Pipe and Fittings A0861-01 ASTM|A0861-01|en-US Standard Specification for High-Silicon Iron Pipe and Fittings Standard new BOS Vol. 01.02 Committee A04
$ 119.00 In stock

Scope

1.1 This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.

1.2 Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain end design.

1.3 Pipe and pipe fittings shall be of the sizes specified in Table 1 and Figs. 1-71 or other sizes that may conform to the requirements given herein.

1.3.1 Pipe:

1.3.1.1 No-hub (MJ) (Fig. 1):

Size (in.) Length (ft)
7
27
37
47

1.3.1.2 Hub/Plain End (Fig. 35):

Size (in.) Length (ft)
27
37
47
67
87
105
125
155

1.3.2 Fitting (No-hub) (MJ):

Figs.
Quarter Bends2
Sixth Bends 3
Return Bends4
Double-Branch Quarter Bend 5
Eighth Bends 6
Sixteenth Bends7
Long-Sweep Quarter Bends 8
Sanitary Y Branches 9
Double-Branch Sanitary Y 10
Sanitary Combination Y and 1/8 Bend 11
Double-Branch Sanitary Combination Y and 1/8 Bend12
Sanitary T Branches 13
Double Branch Sanitary T 14
Sanitary Running Traps 15
Sanitary P Traps 16
Swivel Trap P-Style Short 17
Swivel Trap P-Style Long 18
Swivel Trap S-Style Long 19
Centrifugal Drum Trap P Swivel Type20
Centrifugal Drum Trap S Swivel Type21
Combination Cleanout and Test Tees22
Coupling 23
Pipe Plugs24
Cleanout Plugs 25
No-hub (MJ) Adapter 26
Reducers-Increasers 27
Sink Outlet 28
Sink Overflows 29
Threaded Adapters 30
Trap Cleanout Details31
No-hub (MJ) Adapter 32
(MJ) (No-hub) to Lead Adapter33
Floor Drains34

1.3.3 Fitting (Hub/Plain End):

Figs.
Hub Plain End Pipe35
Straight Tees 36
Sanitary T Branches 37
Sanitary Y Branches 38
Double-Branch Sanitary Tee 39
Double-Branch Sanitary Y 40
Double-Branch Sanitary Combination Y and 1/8 Bend (T-Y) 41
Short-Sweep Quarter Bends42
Long-Sweep Quarter Bends 43
Sanitary Combination Y and 1/8 Bend (T-Y) 44
Quarter Bends 45
Sixth Bends 46
Eighth Bends 47
Sixteenth Bends 48
Sanitary Increasers 49
Hub Strainers50
Sanitary Reducers 51
Double Hubs52
Pipe Plugs 53
Cleanout Plugs54
Adapter-Plain end to Split Flange55
Adapter-Hub to-Split Flange56
Combination Cleanout and Test Tees57
Insertable Joints58
Backwater Valves 59
Sanitary P Traps 60
Sanitary S Traps 61
Sanitary Running Traps 62
Floor Drains63, 64, 65
Floor Drains 66
Floor Drains/Installation-Funnel Attachment 67, 68
Overflow 69
Sink Outlet 70
Detailed Cross Section of Cleanout71
Chemical Composition Table 3
Transverse Bend Test Minimum RequirementsTable 4

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.02
Developed by Subcommittee: A04.12
Pages: 26
DOI: 10.1520/A0861-01
ICS Code: 23.040.10; 23.040.40