Standard Active Last Updated: Oct 04, 2024 Track Document
ASTM A834-24

Standard Specification for Common Requirements for Iron Castings for General Industrial Use

Standard Specification for Common Requirements for Iron Castings for General Industrial Use A0834-24 ASTM|A0834-24|en-US Standard Specification for Common Requirements for Iron Castings for General Industrial Use Standard new BOS Vol. 01.02 Committee A04
$ 61.00 In stock
ASTM International

Abstract

This specification covers the standard common requirements for iron castings to be used for general industrial applications. The castings shall be made in a workman-like manner and shall conform to the dimensions on drawings furnished by the purchaser before manufacture is started. A lot shall consist of one of the following: all the metal from a single heating in a batch-type melting furnace; all the metal poured from two or more batch-type melting furnaces into a single ladle or a single casting; or all the metal poured from a continuous melting furnace for a given period of time between changes in charge, processing conditions, or aim-for chemistry, whichever is the shorter period. Specimens shall undergo tension tests and shall conform to the specified tensile strength requirements. Chemical analysis such as spectrographic methods shall be performed to determine the chemical composition which shall be in accordance to the carbon content requirement of the specimen. Visual inspection shall also be done to ensure that the casting surface is free of adhering sand, scale, cracks, and hot tears.

Scope

1.1 This specification covers a group of requirements that are mandatory requirements when used in conjunction with the following iron casting specifications issued by ASTM:

ASTM Specification

A47/A47M

A48/A48M

A197/A197M

A220/A220M

A278/A278M

A319

A395/A395M

A436

A439/A439M

A518/A518M

A532/A532M

A536

A571/A571M

A823

A842

A874/A874M

A897/A897M

1.2 This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated herein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.

1.3 The requirements of the individual material specification, and this general specification, shall prevail in the sequence named.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.02
Developed by Subcommittee: A04.01
Pages: 4
DOI: 10.1520/A0834-24
ICS Code: 77.140.80