Standard Withdrawn, Replaced Replaced By: A656/A656M    Last Updated: Aug 17, 2017 Track Document
ASTM A808/A808M-00a

Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005)

Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005) A0808_A0808M-00A ASTM|A0808_A0808M-00A|en-US Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005) Standard new BOS Vol. 01.04 Committee A01
$ 0.00 Out of stock

Scope

1.1 This specification covers hot-rolled, high-strength, low-alloy steel plate with improved notch toughness in the as-rolled condition.

1.2 The maximum thickness available is 2 1/2 in. [65 mm].

1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents. Therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

Language unavailable
Format unavailable
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center