Standard Active Last Updated: Oct 08, 2019 Track Document
ASTM A802-19

Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination A0802-19 ASTM|A0802-19|en-US Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination Standard new BOS Vol. 01.02 Committee A01
$ 61.00 In stock

Abstract

This practice covers the standard acceptance criteria for the determination of surface texture, surface roughness, and surface discontinuities of steel castings by visual examination. The acceptance levels utilize the Steel Castings Research and Trade Association (SCRATA) graded reference comparators described as follows: Level A for surface texture, Level B for nonmetallic inclusions, Level C for gas porosity, Level D for solidification discontinuities, Level E for sand expansion discontinuities, Level F for metal inserts, Level G for thermally cut surfaces, Level H for mechanically prepared surfaces, and Level J for welded surfaces.

Scope

1.1 This practice covers the acceptance criteria for the surface inspection of steel castings by visual examination. Four levels of acceptance standards are provided.

1.2 Acceptance levels utilize Steel Castings Research and Trade Association (SCRATA)2 graded reference comparators for the visual determination of surface texture, surface roughness, and surface discontinuities described as follows:
Acceptance levels

A – Surface Texture

B – Nonmetallic Inclusions

C – Gas Porosity

D – Solidification Discontinuities

E – Sand Expansion Discontinuities

F – Metal Inserts

G – Thermally Cut Surfaces

H – Mechanically Prepared Surfaces

J – Welded Surfaces

1.3 Descriptions of terms related to casting discontinuities are in Section 2.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.02
Developed by Subcommittee: A01.18
Pages: 3
DOI: 10.1520/A0802-19
ICS Code: 77.140.80