Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM A788-04a

Standard Specification for Steel Forgings, General Requirements

Standard Specification for Steel Forgings, General Requirements A0788-04A ASTM|A0788-04A|en-US Standard Specification for Steel Forgings, General Requirements Standard new BOS Vol. 01.05 Committee A01
$ 91.00 In stock

Scope

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM:

ASTM DesignationTitle
A 266Forgings, Carbon Steel for Pressure Vessel Components
A 288Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A 289Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A 290Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A 291Carbon and Alloy Steel Forgings for Pinions and Gears for Reduction Gears
A 336Steel Forgings, Alloy, for Pressure and High-Temperature Parts
A 372Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A 427Wrought Alloy Steel Rolls for Cold and Hot Reduction
A 469Vacuum-Treated Steel Forgings for Generator Rotors
A 470Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A 471Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A 508/A 508MQuenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings Pressure Vessels
A 521Steel Closed-Impression Die Forgings for General Industrial Use
A 541/A 541MSteel Forgings, Carbon and Alloy, Quenched and Tempered, for Pressure Vessel Components
A 579Superstrength Alloy Steel Forgings
A 592High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A 649/A 649MForged Steel Rolls Used for Corrugating Paper Machinery
A 668/A 668MSteel Forgings Carbon and Alloy for General Industrial Use
A 723/A 723MAlloy Steel Forgings for High-Strength Pressure Component Application
A 765/A 765MCarbon Steel and Low-Alloy Steel Pressure Vessel Component Forgings with Mandatory Toughness Requirements
A 768Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A 837 Steel Forgings, Alloy, For Carburizing Applications
A 859/A 859MSteel Forgings, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum Alloy Steel, for Pressure Vessel Components
A 891 Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A 909Specification for Steel Forgings, Microalloy, for General Industrial Use
A 940Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A 965/A 965MSpecification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A 1021Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

1.2 In case of conflict in requirements, the requirements of the individual product specifications shall prevail over those of this specification.

1.3 The purchaser may specify additional requirements (see 4.2.3) that do not negate any of the provisions of either this specification or of the individual product specifications. The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order.

1.4 If, by agreement, forgings are to be supplied in a partially completed condition, that is, all of the provisions of the product specification have not been filled, then the material marking (see Section 17) and certification (see Section 16) shall reflect the extent to which the product specification requirements have been met.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.05
Developed by Subcommittee: A01.06
Pages: 11
DOI: 10.1520/A0788-04A
ICS Code: 77.140.85