Standard Withdrawn, No replacement   Last Updated: May 04, 2018 Track Document
ASTM A768/A768M-05(2015)

Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts (Withdrawn 2018)

Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts (Withdrawn 2018) A0768_A0768M-05R15 ASTM|A0768_A0768M-05R15|en-US Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts (Withdrawn 2018) Standard new BOS Vol. 01.05 Committee A01
$ 0.00 Out of stock

Abstract

This specification covers vacuum-treated 12% chromium alloy steel forgings for turbine rotors and shafts. Materials shall be manufactured by specified melting processes, heat treatment (quenching, tempering, and austenitizing), rough machining, boring, and stress relieving. Product analysis shall be used to evaluate if the elemental chemical compositions of the forgings are within specified range. Specimens shall also undergo tension and impact tests to evaluate their conformance to tensile and notch toughness requirements, which include tensile strength, yield strength, elongation, and reduction of area. Nondestructive tests, such as ultrasonic and internal inspection, and stability tests shall be performed as well. Forgings may be retreated one or more times, but not exceeding three additional times, if the results of mechanical tests fail to meet required values.

Scope

1.1 This specification covers vacuum-treated 12 % chromium steel forgings for turbine rotors and shafts.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Language unavailable
Format unavailable
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center