Standard Historical Last Updated: Jun 07, 2023 Track Document
ASTM A742/A742M-20

Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe A0742_A0742M-20 ASTM|A0742_A0742M-20|en-US Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe Standard new BOS Vol. 01.06 Committee A05
$ 66.00 In stock
ASTM International

Abstract

This specification covers polymer precoated steel sheet for corrugated steel pipe (CSP) which is coated after metallic coating on continuous lines by coil coating (roller coating or laminating) processes. The metallic coating shall either be zinc, aluminum-zinc alloy, or zinc-aluminum-mischmetal alloy. Sheet for this purpose shall be furnished flat in coils, flat in cut lengths, or corrugated in cut lengths, all being protected by a mill-applied polymer coating on both sides. The polymer coating shall be classified by grade corresponding to the thickness on each side. Requirements for the cleaning process of the steel sheet and for the polymer coating are given. The test methods for the following polymer coating properties are detailed: adhesion, impact, thickness, holidays, abrasion resistance, imperviousness, freeze-thaw resistance, weatherability, and resistance to microbial attack.

Scope

1.1 This specification covers polymer precoated steel sheet for corrugated steel pipe (CSP) which is coated after metallic coating on continuous lines by coil coating (roller coating or laminating) processes. The metallic coating is either zinc, 55 % aluminum-zinc alloy, or zinc-5 % aluminum-mischmetal alloy. Sheet for this purpose is furnished flat in coils, flat in cut lengths, or corrugated in cut lengths, all being protected by a mill-applied polymer coating on both sides.

1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.3 The following precautionary caveat refers only to the test method portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.06
Developed by Subcommittee: A05.17
Pages: 4
DOI: 10.1520/A0742_A0742M-20
ICS Code: 77.140.50