Standard Active Last Updated: Mar 07, 2022 Track Document
ASTM A604/A604M-07(2022)

Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets A0604_A0604M-07R22 ASTM|A0604_A0604M-07R22|en-US Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets Standard new BOS Vol. 01.05,02.06 Committee A01
$ 76.00 In stock

Significance and Use

4.1 Macroetch testing, as described herein, is a method for examining and rating transverse sections of bars and billets to describe certain conditions of macro segregation which are often characteristic of consumable electrode remelted materials.

4.2 This practice is not intended to define major defects such as those described by Method E381.

Scope

1.1 This practice2 covers testing and inspection and is applicable to bars, billets, and blooms of carbon, alloy, and stainless steel which have been consumable electrode remelted.

1.2 For the purpose of this practice, the consumable electrode remelting process is defined as a steel refining method wherein single or multiple electrodes are remelted into a crucible producing an ingot which is superior to the original electrode by virtue of improved cleanliness or lower gas content or reduced chemical or nonmetallic segregation. See Appendix X1 and Appendix X2 for descriptions of applicable remelting processes.

1.3 This practice and the accompanying comparison macrographs3 are generally applicable to steel bar and billet sizes up to 225 in.2 [1450 cm2] in transverse cross section.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.05
Developed by Subcommittee: A01.06
Pages: 14
DOI: 10.1520/A0604_A0604M-07R22
ICS Code: 77.140.60