Standard Historical Last Updated: Nov 07, 2023 Track Document
ASTM A474-03(2017)

Standard Specification for Aluminum-Coated Steel Wire Strand

Standard Specification for Aluminum-Coated Steel Wire Strand A0474-03R17 ASTM|A0474-03R17|en-US Standard Specification for Aluminum-Coated Steel Wire Strand Standard new BOS Vol. 01.06 Committee A05
$ 73.00 In stock
ASTM International

Abstract

This specification covers five grades of aluminum-coated, steel wire strand composed of a number of round, steel wires, with aluminum coatings, for use as guys, messengers, span wires, and for similar purposed. The five grades are as follows: (1) utilities; (2) common; (3) Siemens-Martin; (4) high-strength; and (5)extra high-strength. The base metal shall be steel made by any commercially steel making process, The ingot or pig aluminum used for coating shall conform to the required impurity limits of copper and iron. All wires shall be stranded with uniform tension. Physical tests shall be performed wherein the steel wire strands shall conform to the required values of breaking strength. The steel specimens shall also conform to the required values of elongation, diameter and weight of coating.

Scope

1.1 This specification covers five grades of aluminum-coated, steel wire strand, composed of a number of round, steel wires, with aluminum coatings, for use as guys, messengers, span wires, and for similar purposes.

1.2 The five grades covered are as follows:

1.2.1 Utilities,

1.2.2 Common,

1.2.3 Siemens-Martin,

1.2.4 High-Strength, and

1.2.5 Extra High-Strength.

1.3 Minimum breaking strengths of strand for each grade are specified in Table 1.

TABLE 1 Physical Properties of Aluminum-Coated Steel Wire Strand

Nominal
Diameter
of Strand,
in. (mm)

Number
of Wires
in
Strand

Nominal
Diameter
of Coated
Wires in
Strand, in.
(mm)

Approximate
Weight of
Strand,
lb/1000 ft
(kg/m)

Minimum Breaking Strength of Strand, lbf (kN)

Utilities GradeA

Common
Grade

Siemens-
Martin
Grade

High-
Strength
Grade

Extra-High-
Strength
Grade

3/16 

(4.76)

7

0.062 (1.57)

 73 (0.108)

  . . .

. . .

 1 150

(5.1)

  1 900

(8.5)

  2 850

(12.7)

 . . .

. . .

3/16 

(4.76)

7

0.065 (1.65)

 80 (0.118)

  2 400

(10.7)  (1)B

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

1/4 

(6.35)

3

0.120 (3.05)

117 (0.173)

  3 150

(14.0)  (2)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

1/4 

(6.35)

3

0.120 (3.05)

117 (0.173)

  4 500

(20.0)  (3)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

1/4 

(6.35)

7

0.080 (2.03)

121 (0.179)

  . . .

. . .

 1 900

(8.5)

  3 150

(14.0)

  4 750

(21.1)

 6 650

(29.6)

9/32 

(7.14)

7

0.093 (2.36)

164 (0.243)

  4 600

(20.5)  (1)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

5/16 

(7.94)

3

0.145 (3.68)

171 (0.253)

  6 500

(28.9)  (3)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

5/16 

(7.94)

7

0.104 (2.64)

205 (0.303)

  . . .

. . .

 3 200

(14.2)

  5 350

(23.8)

  8 000

(35.6)

 11 200

(49.8)

5/16 

(7.94)

7

0.109 (2.77)

225 (0.333)

  6 000

(26.7)  (1)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

3/8 

(9.52)

3

0.165 (4.19)

220 (0.326)

  8 500

(37.8)  (3)

 . . .

. . .

  . . .

. . .

  . . .

. . .

 . . .

. . .

3/8 

(9.52)

7

0.120 (3.05)

273 (0.404)

 11 500

(51.2)  (4)

 4 250

(18.9)

  6 950

(30.9)

 10 800

(48.0)

 15 400

(68.5)

7/16 

(11.11)

7

0.145 (3.68)

399 (0.591)

 18 000

(80.1)  (4)

 5 700

(25.4)

  9 350

(41.6)

 14 500

(64.5)

 20 800

(92.5)

1/2 

(12.7)

7

0.165 (4.19)

517 (0.765)

 25 000

(111.2) (4)

 7 400

(32.9)

 12 100

(53.8)

 18 800

(83.6)

 26 900

(119.7)

(A) The utilities grade is used principally by communication and power and light industries.
(B) The last numbers in parentheses refer to elongation requirements specified in Section 9.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.06
Developed by Subcommittee: A05.12
Pages: 4
DOI: 10.1520/A0474-03R17
ICS Code: 29.060.10