Standard Historical Last Updated: Jul 02, 2012 Track Document
ASTM A455/A455M-03(2007)

Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese A0455_A0455M-03R07 ASTM|A0455_A0455M-03R07|en-US Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese Standard new BOS Vol. 01.04 Committee A01
$ 73.00 In stock

Abstract

This specification covers high-tensile strength carbon-manganese steel plates intended for welded pressure vessels. Plates are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. The steel shall conform to the chemical composition requirements. The plates, as represented by the tension test specimens, shall conform to the mechanical property requirements.

Scope

1.1 This specification covers high-tensile strength carbon-manganese steel plates intended for welded pressure vessels.

1.2 This steel is usually made to a semi-killed or capped deoxidation practice; however, at the purchaser's or the steel producer's option, the steel may be made silicon-killed or aluminum-killed.

1.3 The maximum thickness of plates furnished under this specification shall be ¾in. [20 mm].

1.4 For plates produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A 20/A 20M apply.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.04
Developed by Subcommittee: A01.11
Pages: 2
DOI: 10.1520/A0455_A0455M-03R07
ICS Code: 77.140.30