Standard Historical Last Updated: Jun 09, 2015 Track Document
ASTM A450/A450M-10

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes A0450_A0450M-10 ASTM|A0450_A0450M-10|en-US Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes Standard new BOS Vol. 01.01 Committee A01
$ 83.00 In stock

Abstract

This specification covers carbon and low alloy steel tubes. Steel samples shall be melt processed and shall either be ingot cast or strand cast. Heat and product analyses shall be performed on the steel materials. Steel specimens shall also undergo tensile tests and shall conform to required values of yield strength and elongation. Flattening test, reverse flattening test, flaring test, flange test, hardness test, hydrostatic test, air underwater pressure test, and nondestructive tests shall be performed on the steel materials.

Scope

1.1 This specification covers a group of requirements which, with the exceptions of 5.3 and Sections 6, 7, 18, 19, 20, 21, 22, 23, and 24, are mandatory requirements to the following ASTM tubular product specifications:

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.01
Developed by Subcommittee: A01.09
Pages: 10
DOI: 10.1520/A0450_A0450M-10
ICS Code: 23.040.10