Standard Withdrawn, No replacement   Last Updated: Dec 31, 2010 Track Document
ASTM A417-93(2004)

Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008)

Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008) A0417-93R04 ASTM|A0417-93R04|en-US Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008) Standard new BOS Vol. 01.03 Committee A01
$ 0.00 Out of stock

Abstract

This specification covers round, uncoated, cold-drawn spring wire in coils intended for the manufacture of upholstery springs such as zig-zag, square-formed, and sinuous. The steel shall be made by open-heart, basic-oxygen, or electric-furnace processes. Heat analysis shall be made to determine the percentage of elements, such as carbon and manganese, present in the spring wire. Tension and wrap tests shall be done for one test specimen for each ten coils. Workmanship, inspection, packaging, product marking, and loading are also covered.

Scope

1.1 This specification covers round, uncoated, cold-drawn spring wire in coils having properties and quality intended for the manufacture of the following upholstery springs:

1.1.1 Type A—Zig-zag (U-formed),

1.1.2 Type B—Square-formed, and

1.1.3 Type C—Sinuous for furniture spring units.

1.2 These types of upholstery springs are used in the manufacture of automotive seat springs and furniture springs. The wire is not intended for the manufacture of mechanical springs.

Language unavailable
Format unavailable
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center