Standard Historical Last Updated: Aug 16, 2017
ASTM A302/A302M-97e1

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel


1.1 This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels.

1.2 Material under this specification is available in four grades having different strength levels as follows:

Grade Tensile Strength, ksi [MPa] Type A 75-95 [515-655] Mn-Mo B 80-100 [550-690] Mn-Mo C 80-100 [550-690] Mn-Mo-Ni D 80-100 [550-690] Mn-Mo-Ni

1.3 The maximum thickness of plates is limited only by the capacity of the chemical composition to meet the specified mechanical property requirements. The minimum thickness is limited to 0.25 in. [6.5 mm].

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Book of Standards Volume: 01.04
Developed by Subcommittee: A01.11
Pages: 2
DOI: 10.1520/A0302_A0302M-97E01
ICS Code: 77.140.30; 77.140.50