Standard Historical Last Updated: Nov 10, 2021 Track Document
ASTM A67-00(2016)

Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked A0067-00R16 ASTM|A0067-00R16|en-US Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked Standard new BOS Vol. 01.04 Committee A01
$ 73.00 In stock

Abstract

This specification deals with steel tie plates, low-carbon and high-carbon-hot-worked that are used in railroad tracks. The steel shall be manufactured by either basic-oxygen or electric-furnace processes and may be cast by a continuous process or in ingots. Both Grade 1 and Grade 2 tie plates may be sheared, punched, or slotted either hot or cold but only the latter may be placed into an enclosure to assure proper cooling. One bend test shall be made from each identified heat. The specimens for testing shall be taken from finished tie plates, longitudinally with the direction of rolling. They shall be rectangular in section and shall have two faces as rolled. If high carbon tie plates represented by bend tests fail to meet the requirements specified, they may be annealed not more than twice and be resubmitted for testing.

Scope

1.1 This specification covers steel tie plates for use in railroad track.

1.2 Two grades of tie plates are described: Grade 1, low-carbon, and Grade 2, high-carbon-hot-worked.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.04
Developed by Subcommittee: A01.01
Pages: 4
DOI: 10.1520/A0067-00R16
ICS Code: 77.140.50