| ||Format||Pages||Price|| |
|6||$52.00||  ADD TO CART|
|Hardcopy (shipping and handling)||6||$52.00||  ADD TO CART|
This specification covers counter-top model noncarbonated beverage dispensers that are mechanically refrigerated and have rigid, transparent, impact-resistant containers to afford a visual display of the beverage dispensed. The beverage dispensers covered by this specification are intended to circulate, cool, and dispense noncarbonated beverages such as pulpy juices, frozen concentrates, and syrup drinks. The beverage dispensers shall be of the following types, classes, styles, and sizes: Types I and II; Classes A and B; Styles A (sizes 1, 2, 3, and 4), B (sizes 1 and 2), and C (size 1). The beverage dispenser shall consist essentially of a base that contains a complete refrigeration system and supports a rigid, transparent, impact resistant, bowl-type beverage container(s) with cover(s). Performance test, pull-down test, energy consumption test, maximum ambient temperature and high humidity test, bowl impact test, and operation production performance test shall be performed to conform with the specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers counter-top model noncarbonated beverage dispensers that are mechanically refrigerated and have rigid, transparent, impact-resistant containers to afford a visual display of the beverage dispensed. The beverage dispensers covered by this specification are intended to circulate, cool, and dispense noncarbonated beverages such as pulpy juices, frozen concentrates, and syrup drinks.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 The following safety hazard caveat pertains only to the test method portion, Section This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. , of this specification:
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ANSI/UL StandardsANSI/UL Standard 471 Commercial Refrigerators and Freezers ANSI/UL Standard 969
ANSI StandardANSI Z1.4 Sampling Procedures and Tables for Inspection by Attributes
ANSI/NSF International StandardsNSF/ANSI 18 Manual Food and Beverage Dispensing Equipment NSF/ANSI 51 Plastic Materials and Components Used in Food Equipment
NSTA StandardNSTA Pre-Shipping Test Procedures
Military StandardsMIL-STD-1399/300 Interface Standard for Shipboard Systems, Section 300A, Electric Power, Alternating Current MIL-STD-167/1 Mechanical Vibrations of Shipboard Equipment Type IEnvironmental and Type IIInternally Excited
D3951 Practice for Commercial Packaging
F760 Specification for Food Service Equipment Manuals
F1166 Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
ICS Number Code 55.230 (Distribution and vending machines)
UNSPSC Code 48101702(Non carbonated beverage dispenser)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F918-15(2020)e1, Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product), ASTM International, West Conshohocken, PA, 2020, www.astm.orgBack to Top