| ||Format||Pages||Price|| |
|3||$40.00||  ADD TO CART|
|Hardcopy (shipping and handling)||3||$40.00||  ADD TO CART|
This specification covers the construction of marine log desks of steel construction with cabinets that are to be provided with two adjustable shelves. Sheet metal shall be of commercial quality and the metal components shall be joined by welding or gluing with a structural adhesive to prevent racking of chest during handling. Spotwelds shall be spaced at a specific distance wherein visible spotwelds higher than the general surface of the adjacent metal shall be ground flush while visible spotweld depressions shall be spot filled and sanded flush. To prevent buckling or oil-canning, side panels shall be stiffened suitably. Sound deadening shall be vermin proof and shall be applied to back and inner face of sides of chest. A furniture base shall also be provided to secure the log desk to deck.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers the construction of marine log desks of steel construction with cabinets.
1.2 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are provided for information only.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A366/A366M Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled
D907 Terminology of Adhesives
F782 Specification for Doors, Furniture, Marine
F825 Specification for Drawers, Furniture, Marine, Steel
F826 Specification for Tops, Furniture, Marine, Steel
American Institute of Steel Construction ManualAISC Wire and Sheet Metal Gages— Equivalent Thickness in Decimals of an Inch, U.S. Standard Gage for Uncoated Hot and Cold Rolled Sheets Available from American Institute of Steel Construction (AISC), One E. Wacker Dr., Suite 700, Chicago, IL 60601-2001, http://www.aisc.org.
ICS Number Code 47.020.70 (Navigation and control equipment)
UNSPSC Code 11101704(Steel)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F823-93(2010), Standard Specification for Desk, Log, Marine, Steel, with Cabinet, ASTM International, West Conshohocken, PA, 2010, www.astm.orgBack to Top