ASTM F3020 - 19a

    Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security

    Active Standard ASTM F3020 | Developed by Subcommittee: F12.60

    Book of Standards Volume: 15.08


      Format Pages Price  
    PDF 55 $76.00   ADD TO CART
    Hardcopy (shipping and handling) 55 $76.00   ADD TO CART
    Standard + Redline PDF Bundle 110 $91.00   ADD TO CART



    1. Scope

    1.1 This standard applies to all hand-worn or glove-type metal detectors used to find metal contraband concealed or hidden on people or other objects with hand-accessible surfaces. Hand-worn metal detectors (HWMDs) are significantly different in design compared to the more common hand-held metal detector (HHMD). For example, the HWMD generates a much more localized magnetic field than does the HHMD and the useful field of the HWMD is normal to the plane of the hand whereas the useful field of the HHMD is multi-directional.

    1.2 This standard describes baseline-performance requirements, which includes metal object detection performance, safety (electrical, mechanical, fire), electromagnetic compatibility, environmental conditions and ranges, and mechanical durability. The requirements for metal detection performance are unique and, therefore, test methods for these parameters are provided, including the design of test objects. An agency or organization using this standard is encouraged to add their unique operationally-based requirements to those requirements listed in this baseline-performance standard.

    1.3 This documentary standard describes the use of spherical test objects, instead of actual threat objects or exemplars of threat objects, to test the detection performance of hand-worn metal detectors. Spherical test objects are used because the detectability of spherical test objects is not orientation dependent, whereas this is not true for non-spherical test objects. This orientation-dependent detectability of non-spherical test objects may allow a HWMD to be incorrectly attributed a higher performance capability than that HWMD is capable of providing. To aid agencies wishing to add specific threat objects to their detection performance requirements, included in Appendix X1 is the analysis of the probability of detection for different orientations of agency-specific non-spherical threat objects.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    F3356 Practice for Conformity Assessment of Metal Detectors Used in Safety and Security


    ICS Code

    ICS Number Code 13.320 (Alarm and warning systems)

    UNSPSC Code

    UNSPSC Code 41111903(Metal detectors)


    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/F3020-19A

    Citation Format

    ASTM F3020-19a, Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security, ASTM International, West Conshohocken, PA, 2019, www.astm.org

    Back to Top