If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM F2798 - 09(2018)

    Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

    Active Standard ASTM F2798 | Developed by Subcommittee: F25.11

    Book of Standards Volume: 01.08

      Format Pages Price  
    PDF 10 $52.00   ADD TO CART
    Hardcopy (shipping and handling) 10 $52.00   ADD TO CART

    1. Scope

    1.1 This specification defines the requirements applicable to design, construction and testing of sealless, rotary positive displacement pumps with oil-through motors for ship lubricating oil service. The complete pump and motor assembly is referred to as canned lube oil pump (CLP). This specification applies to CLPs pumping oil with a SAE rating of 20–50.

    1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A27/A27M Specification for Steel Castings, Carbon, for General Application

    A159 Specification for Automotive Gray Iron Castings

    A193/A193M Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A216/A216M Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A395/A395M Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A536 Specification for Ductile Iron Castings

    A563 Specification for Carbon and Alloy Steel Nuts

    A564/A564M Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A574 Specification for Alloy Steel Socket-Head Cap Screws

    A582/A582M Specification for Free-Machining Stainless Steel Bars

    B23 Specification for White Metal Bearing Alloys (Known Commercially as Babbitt Metal)

    B148 Specification for Aluminum-Bronze Sand Castings

    B152/B152M Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B271 Specification for Copper-Base Alloy Centrifugal Castings

    B505/B505M Specification for Copper Alloy Continuous Castings

    B584 Specification for Copper Alloy Sand Castings for General Applications

    D2000 Classification System for Rubber Products in Automotive Applications

    D3951 Practice for Commercial Packaging

    F912 Specification for Alloy Steel Socket Set Screws

    F1510 Specification for Rotary Positive Displacement Pumps, Ships Use

    ASME/ANSI Standards

    ASME/ANSI B16.5

    Hydraulic Institute Standards

    ANSI/HI 3.6 Rotary Pump Tests

    AISI Standards

    1018 Carbon Steel

    1141 Carbon Steel


    4140 Chromium-Molybdenum Steel


    4340 Nickel-Chromium-Molybdenum Steel

    AIA Standards

    NASM 17829

    API Standards

    API Standard 676 Positive Displacement PumpsRotary

    ICS Code

    ICS Number Code 47.020.20 (Marine engines and propulsion systems)

    UNSPSC Code

    UNSPSC Code 25111900(Marine craft systems and subassemblies)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/F2798-09R18

    Citation Format

    ASTM F2798-09(2018), Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications, ASTM International, West Conshohocken, PA, 2018, www.astm.org

    Back to Top