| ||Format||Pages||Price|| |
|7||$45.00||  ADD TO CART|
|Hardcopy (shipping and handling)||7||$45.00||  ADD TO CART|
|Standard + Redline PDF Bundle||14||$54.00||  ADD TO CART|
This specification covers eye protectors, designed for use by players of field hockey that minimize or significantly reduce injury to the eye and adnexa due to impact by and penetration of field hockey balls and field hockey sticks. Contact with the eye of the headform constitutes failure. Protective eyewear offers protection only to the eyes and does not protect other parts of the head. Eye protectors are classified into the following types: Types I, II, and III. Optical quality, luminous transmittance, prismatic deviation measurements, haze, refractive power measurements, surface imperfections and internal defects, and mechanical tests shall be performed to conform to the specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers eye protectors with a plano (that is, non-prescription) lens or without a lens, designed for use by players of field hockey, that minimize or significantly reduce injury to the eye and adnexa due to impact by and penetration of field hockey balls and field hockey sticks. Contact with the eye of the headform constitutes failure. Protective eyewear offers protection only to the eyes and does not protect other parts of the head.
1.2 Testing is done in a laboratory setting. Eye contact is determined by observation.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Metric units of measurement in this specification are in accordance with the International System of Units (SI). If a value for measurement as given in this specification is followed by an equivalent value in other units, the first stated is to be regarded as the requirement. A given equivalent value may be approximate.
1.4 The following precautionary caveat pertains only to the test methods portion (Sections This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. , , and ) of this specification:
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D1003 Test Method for Haze and Luminous Transmittance of Transparent Plastics
F1887 Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
F1888 Test Method for Compression-Displacement of Baseballs and Softballs
ANSI StandardsANSI Z80.3 Requirements for Nonprescription Sunglasses and Fashion Eyewear ANSI Z87.1 Practice for Occupational and Educational Eye and Face Protectors
ICS Number Code 13.340.20 (Head protective equipment)
UNSPSC Code 49221503(Sport safety equipment other than headgear)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F2713-14, Standard Specification for Eye Protectors for Field Hockey, ASTM International, West Conshohocken, PA, 2014, www.astm.orgBack to Top