| ||Format||Pages||Price|| |
|8||$45.00||  ADD TO CART|
|Hardcopy (shipping and handling)||8||$45.00||  ADD TO CART|
|Standard + Redline PDF Bundle||16||$54.00||  ADD TO CART|
This specification covers coiled, machine-made glass fiber reinforced thermoplastic pipe up to 6 in. nominal size, having discrete, unbonded inner and outer layers of thermoplastic compounds and an intermediate structural layer of unbonded, dry glass fiber reinforcement to provide higher strength. Included are a classification system and requirements for materials, mechanical properties, dimensions, performance, methods of test, and marking. Reinforced thermoplastic pipes are used for oil and gas applications, including transport of multiphase fluids, hydrocarbon gases, hydrocarbon liquids and non-potable water. Physical requirements cover workmanship, dimensions and tolerances, pipe requirements (pressure design basis, cell classification, pipe re-categorization, bending requirements), fittings requirements, joint requirements (leak test, tensile pull test requirements, temperature cycling, elevated temperature test).
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers coiled, machine-made glass fiber reinforced thermoplastic pipe up to 6 in. nominal size, having discrete, unbonded inner and outer layers of thermoplastic compounds and an intermediate structural layer of unbonded, dry glass fiber reinforcement to provide higher strength. Included are a classification system and requirements for materials, mechanical properties, dimensions, performance, methods of test, and marking. Reinforced thermoplastic pipes are used for oil and gas applications, including transport of multiphase fluids, hydrocarbon gases, hydrocarbon liquids and non-potable water.
1.2 The piping system will comprise one or more runs of pipe along with mechanical fittings, designed and for use with this composite pipe, connecting them to each other and to the other pipeline components.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A105/A105M Specification for Carbon Steel Forgings for Piping Applications
A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A333/A333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A350/A350M Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
D578 Specification for Glass Fiber Strands
D618 Practice for Conditioning Plastics for Testing
D883 Terminology Relating to Plastics
D1598 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599 Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1600 Terminology for Abbreviated Terms Relating to Plastics
D2105 Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2122 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2143 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2992 Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D3350 Specification for Polyethylene Plastics Pipe and Fittings Materials
F412 Terminology Relating to Plastic Piping Systems
PPI StandardsTR-4 PPI Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis (SDB), Pressure Design Basis (PDB) and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe
ANSI StandardsB 16.5 Pipe Flanges and Flanged Fittings
ICS Number Code 23.040.20 (Plastic pipes)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F2686-14, Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe, ASTM International, West Conshohocken, PA, 2014, www.astm.orgBack to Top