| ||Format||Pages||Price|| |
|9||$46.00||  ADD TO CART|
|Hardcopy (shipping and handling)||9||$46.00||  ADD TO CART|
|Standard + Redline PDF Bundle||18||$55.20||  ADD TO CART|
This specification provides safety and performance requirements for portable pools for residential use. This specification addresses pool hazards including childhood drowning, sanitation, electrical safety, and entrapment. Portable pool has two types: Type A which uses no pump and filter and Type B which uses pumps and filters. Pools shall be resistant to horizontal and vertical forces in order to avoid break or collapse when tested. All air valves shall be accessible for each inflatable section. Once a section of the pool is inflated, the air valve shall be capable of being inserted inside the inflated section without extending beyond the surface more than a certain length. Written instructions shall be provided with each pool. They shall include the pool model name or number, the name, address, and phone number of the manufacturer, distributor, or retailer and shall cover, at a minimum: pool safety, product description, parts and assembly (including where and how to affix safety signs, if applicable), filling (including information on the fill line), emptying, deflation (if applicable), cleaning, maintenance, and storage.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification provides safety and performance requirements for portable pools for residential use.
1.2 This specification addresses pool hazards including childhood drowning, sanitation, electrical safety, and entrapment.
1.3 This specification covers both portable pools that are designed to be used with pumps and filters and those not designed to be used with pumps and filters.
1.4 This specification covers all types of portable pools with a water depth of less than 36 in. (91 cm). Aboveground/on ground residential swimming pools with a water depth of 36 in. (91 cm) or greater shall comply with ANSI/APSP-4.
1.5 This specification does not cover public pools, pools used in commercial amusement parks, water fountains, water displays, or fish ponds.
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
F963 Consumer Safety Specification for Toy Safety
F1346 Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
ICS Number Code 97.220.10 (Sports facilities)
UNSPSC Code 95122307(Swimming pool)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F2666-16, Standard Specification for Aboveground Portable Pools for Residential Use, ASTM International, West Conshohocken, PA, 2016, www.astm.orgBack to Top