If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
ASTM F2152 - 07(2021)
Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
| Format | Pages | Price | ||
 |
4 | $48.00 |  ADD TO CART |
|
 |
Hardcopy (shipping and handling) | 4 | $48.00 | ADD TO CART |
Historical Version(s) - view previous versions of standard
Work Item(s) - proposed revisions of this standard
More F20.15 Standards Related Products Standard References
Abstract
This guide covers a set of criteria to evaluate the performance, material characteristics, and essential features of fire-resistant oil spill containment boom. Two types of fire-resistant oil containment Boom are covered: those that are intrinsically fire-resistant through the use of fire-resistant materials, and those that provide fire-resistance through the use of coolants. The boom shall be tested for operability, oil containment, and fire resistance.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This guide covers a set of criteria to evaluate the performance, material characteristics, and essential features of fire-resistant oil spill containment boom.
1.2 This guide covers two types of fire-resistant oil containment boom: those that are intrinsically fire-resistant through the use of fire-resistant materials, and those that provide fire-resistance through the use of coolants. This guide may not be fully applicable to other types of fire-resistant boom.
1.3 This guide is one of four related to in-situ burning of oil spills. Guide F1788 addresses environmental and operational considerations, Guide F1990 addresses ignition devices, and Guide F2230 addresses burning in ice conditions.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
F625/F625M Practice for Classifying Water Bodies for Spill Control Systems
F715 Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
F818 Terminology Relating to Spill Response Booms and Barriers
F962 Specification for Oil Spill Response Boom Connection: Z-Connector
F1093 Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
F1523 Guide for Selection of Booms in Accordance With Water Body Classifications
F1788 Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
F1990 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F2084/F2084M Guide for Collecting Containment Boom Performance Data in Controlled Environments
F2230 Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
ICS Code
ICS Number Code 13.220.50 (Fire-resistance of building materials and elements)
UNSPSC Code
UNSPSC Code 77131502(Oil spillage control services)
Referencing This Standard
| Link Here | |||
| Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/F2152-07R21
Citation Format
ASTM F2152-07(2021), Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom, ASTM International, West Conshohocken, PA, 2021, www.astm.org
Back to Top