| ||Format||Pages||Price|| |
|6||$52.00||  ADD TO CART|
|Hardcopy (shipping and handling)||6||$52.00||  ADD TO CART|
This specification covers the design, construction, testing, and operating requirements for pneumatic-operated, globe-style, control valves complete with actuators for various fluid systems (steam, gas, and liquid applications). The control valves with actuators may be procured under this specification complete with all associated pneumatic instrumentation necessary for the valve to function in the system application. Valves shall be of following material grades: Grade A; Grade B; Grade C; and Grade D. Valves shall be of following pressure rating types: Type 1; Type 2; Type 3; and Type 4. The inherent flow characteristics of the valve shall be specified as quick-opening, linear-opening, equal-percentage opening, or as specified. Visual examination, hydrostatic shell test, nondestructive examination, seat leakage test, and functional test shall be performed to conform with the specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers the design, construction, testing, and operating requirements for pneumatic-operated, globe-style, control valves complete with actuators for various fluid systems (steam, gas, and liquid applications). The control valves with actuators may be procured under this specification complete with all associated pneumatic instrumentation necessary for the valve to function in the system application; however, complete and detailed requirements for air instrumentation are beyond the scope of this specification and thus are not included here. This specification is not intended to cover quarter-turn or multi-turn stem valves.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASME StandardsB16.34 Valves - Flanged and Buttwelding End Steel, Nickel Alloy, and Other Special Allows
Manufacturers Standardization Society of the Valve and Fitting IndustryMSS SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions
Fluid Controls Institute StandardFCI 70-2 Control Valve Seat Leakage
Military Standards and SpecificationsMIL-F-20042 Flanges, Pipe and Bulkhead, Bronze (Silver Brazing)
Government Drawings and Publications803-1385884 Unions, Butt and Socket Welding, 6000 lb/in.2 WOG, NPS, For UT Inspections
ISA StandardISA-S75.05 Standard for Control Valve Terminology
ICS Number Code 23.060.40 (Pressure regulators)
UNSPSC Code 40141609(Control valves)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F1985-99(2019)e1, Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves, ASTM International, West Conshohocken, PA, 2019, www.astm.orgBack to Top