ASTM F1347 - 91(2018)

    Standard Specification for Manually Operated Fueling Hose Reels

    Active Standard ASTM F1347 | Developed by Subcommittee: F25.07

    Book of Standards Volume: 01.07


      Format Pages Price  
    PDF 6 $48.00   ADD TO CART
    Hardcopy (shipping and handling) 6 $48.00   ADD TO CART



    Abstract

    This specification covers manually operated fueling hose reels for use with collapsible and noncollapsible hose. Fueling hose reels shall be of one of the following types as specified: type 1, type 2, type 3, and type 4. The hose reel shall be of a durable, rigid construction, as light in weight and compact as practicable. The reel drum may have either smoothly formed flat sides or suitable spoke ribs, so formed as not to damage the hose. Reels shall be provided with a holding brake to lock the reel in any position. The reel shall be fitted with a device for clamping the hose nozzle securely to the reel to prevent unwinding of the hose and damage to the nozzle. The reel hub discharge shall be angled to provide a smooth tangential contact of the hose with the reel drum. The reel shall have an aromatic fuels tight rotating joint between reel inlet connection and the rotating hub on the reel drum. The reel inlet connection shall be flanged, the flange being part of the rotating swivel joint. Hydrostatic tset and operating test shall be performed to meet the requirements prescribed.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers manually operated fueling hose reels for use with collapsible and noncollapsible hose.

    1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.3 The following precautionary caveat pertains only to the test methods portion, Section 12 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    Military Specifications

    MIL-F-20042 Flanges, Pipe and Bulkhead, Bronze (Silver Brazing)

    MIL-H-17902 Hose, End Fittings and Hose Assemblies, Synthetic Rubber, Aircraft Fuels

    MIL-P-24441

    MIL-S-901 Shock Test, H.I. (High-Impact); Shipboard Machinery, Equipment and Systems, Requirements for

    MIL-T-16366 Terminals, Electric Lug and Conductor Splices, Crimp Style

    Military Standard

    MIL-STD-130 Identification Marking of U.S. Military Property

    ASTM Standards

    B148 Specification for Aluminum-Bronze Sand Castings

    D3006 Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape

    D3951 Practice for Commercial Packaging


    ICS Code

    ICS Number Code 23.040.70 (Hoses and hose assemblies)

    UNSPSC Code

    UNSPSC Code 40142022(Hose reel)


    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/F1347-91R18

    Citation Format

    ASTM F1347-91(2018), Standard Specification for Manually Operated Fueling Hose Reels, ASTM International, West Conshohocken, PA, 2018, www.astm.org

    Back to Top