ASTM F1184 - 16
Standard Specification for Industrial and Commercial Horizontal Slide Gates
| Format | Pages | Price | ||
 |
4 | $44.00 |  ADD TO CART |
|
 |
Hardcopy (shipping and handling) | 4 | $44.00 | ADD TO CART |
|
Standard + Redline PDF Bundle  |
8 | $52.00 | ADD TO CART |
Historical Version(s) - view previous versions of standard
Work Item(s) - proposed revisions of this standard
More F14.40 Standards Related Products Standard References
Abstract
This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be of the following types: Type I—overhead slide gates that are supported only from above; and Type II—cantilever slide gates spanning an opening lacking a top or bottom support within that opening. Furthermore, Type II gates shall be supplied in any of the two classes as follows: Class 1— steel frame gates and aluminum frame gates using external rollers; and Class 2— frame gates and aluminum frame gates using internal rollers. Gates of either type and class shall conform to material and manufacture requirements specified for zinc-coated steel frames, aluminum alloy gate frames, polymer-coated steel or aluminum frames, chain link gate fabric, barbed wire top, and barbed tape. Type I gates shall additionally meet the specified requirements for materials and manufacture, shape and size, dimension and weight, gate posts, gate support members, roller assembly, gate extensions, and gate extension bracing. Conversely, Type II gates shall additionally meet the specified requirements for shape and size, gate posts, guide posts (for Class 1 only), roller assembly (external and internal rollers, top roller guards, and bottom protective plates), performance criteria, field adjustment, and latching.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers detailed requirements for cantilever and overhead slide chain link fence gates, gate posts, and accessories for industrial and commercial applications.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A780 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
F567 Practice for Installation of Chain-Link Fence
F1043 Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F1083 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F2200 Specification for Automated Vehicular Gate Construction
ICS Code
ICS Number Code 91.090 (External structures)
UNSPSC Code
UNSPSC Code 30172000(Gates)
Referencing This Standard
| Link Here | |||
| Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/F1184-16
Citation Format
ASTM F1184-16, Standard Specification for Industrial and Commercial Horizontal Slide Gates, ASTM International, West Conshohocken, PA, 2016, www.astm.org
Back to Top