| ||Format||Pages||Price|| |
|3||$48.00||  ADD TO CART|
|Hardcopy (shipping and handling)||3||$48.00||  ADD TO CART|
|Standard + Redline PDF Bundle||6||$56.00||  ADD TO CART|
This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray- type dish-washing and glass-washing machines. Detergent, rinse additive, and sanitizing agent feeders shall be of the following types and styles: Types I, II, III, IV, V, and VI; and Style I; II; III; IV; V; and VI. Materials used shall be free from defects that would adversely affect the performance or maintainability of individual components or of the overall assembly. The feeder shall be complete so that when connected to the specified source of power (electrical or water, or both), the unit can be used for its intended function. Feeders shall be tested in accordance with specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers detergent feeders, rinse additive feeders, and sanitizing agent feeders intended to automatically maintain the concentration of additives in the wash, recirculated rinse, or non-recirculated rinse water of commercial spray-type dishwashing and glasswashing machines.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 The following safety hazards caveat pertains only to the test methods portion, Section This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. , of this specification:
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
NSF International StandardsNSF Food Service Equipment Listing NSF No. 29 Detergent/Chemical Feeders for Commercial Dishwashing Machines NSF No. 51 Plastic Material and Components Used in Food Equipment
A167 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
D3951 Practice for Commercial Packaging
F760 Specification for Food Service Equipment Manuals
Underwriters Laboratories StandardsUL 73 UL 94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances
Building Officials and Code Administrators International StandardBOCA Basic Plumbing Code
ICS Number Code 97.040.40 (Dishwashers)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F1021-18, Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines, ASTM International, West Conshohocken, PA, 2018, www.astm.orgBack to Top