If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM E1123 - 86(2016)

    Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

    Active Standard ASTM E1123 | Developed by Subcommittee: E33.10

    Book of Standards Volume: 04.06

      Format Pages Price  
    PDF 5 $52.00   ADD TO CART
    Hardcopy (shipping and handling) 5 $52.00   ADD TO CART

    Significance and Use

    3.1 The sound transmission loss provided by a material that covers a flat surface depends not only on the physical properties of the material but also on the type of structure to which it is mounted and the mounting method used.

    3.2 Naval and marine architects and design engineers require specific transmission loss characteristics of acoustical treatment materials as they would exhibit installed on a ship's structure. The mounting structure and procedures specified in these practices are intended to simulate such a shipboard environment.

    3.3 Test reports may refer to this mounting by Practices E1123 instead of providing a detailed description of the mounting used.

    1. Scope

    1.1 These practices describe test specimen mountings to be used for naval and marine ship applications during sound transmission loss tests performed in accordance with Test Method E90.

    1.2 The structure specified in these practices is intended for mounting of single-layer treatments or composite treatments consisting of various materials and configurations. Acoustical treatment materials may be combinations of acoustical absorbent materials, limp mass septums, and insulation materials.

    1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    C634 Terminology Relating to Building and Environmental Acoustics

    E90 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    ICS Code

    ICS Number Code 47.020.05 (Materials and components for shipbuilding)

    UNSPSC Code

    UNSPSC Code 30141601(Acoustical insulation)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/E1123-86R16

    Citation Format

    ASTM E1123-86(2016), Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials, ASTM International, West Conshohocken, PA, 2016, www.astm.org

    Back to Top