If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM D8090 - 17

    Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods

    Active Standard ASTM D8090 | Developed by Subcommittee: D01.24

    Book of Standards Volume: 06.01

      Format Pages Price  
    PDF 7 $54.00   ADD TO CART
    Hardcopy (shipping and handling) 7 $54.00   ADD TO CART

    Significance and Use

    5.1 By following this test method, the particle size, particle size distribution and particle shape of particulates in liquid paint and pigment dispersions can be measured.

    5.2 Particle size, particle size distribution and particle shape have a great effect on the color, opacity and gloss of paints. Reproducing these characteristics is critical to the quality and performance of the paint produced.

    5.3 The dynamic imaging instrument is useful during manufacturing to detect oversize particles as well as the required size distribution of particles in order to provide quality and consistency from batch to batch.

    1. Scope

    1.1 This test method covers the determination of particle size distribution and particle shape of liquid paints and pigmented liquid coatings by Dynamic Image Analysis. This method includes the reporting of particles 1 µm in size and up to 300 µm in size.

    Note 1: Shape is used to classify particles, droplets and bubbles and is not a reporting requirement.

    Note 2: The term paint(s) as used in this document includes liquid paint and liquid pigmented coatings.

    1.1.1 Some paints may be too viscous to flow through the imaging instrument without dilution which may be used to help the paint flow as long as significant contamination is not introduced into the paint.

    1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D16 Terminology for Paint, Related Coatings, Materials, and Applications

    D3925 Practice for Sampling Liquid Paints and Related Pigmented Coatings

    Other Documents

    ISO12103-1 Medium Test Dust

    NIST SRM 1982 Thermal Spray Powder Particle Size Distribution

    ICS Code

    ICS Number Code 87.040 (Paints and varnishes)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D8090-17

    Citation Format

    ASTM D8090-17, Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods, ASTM International, West Conshohocken, PA, 2017, www.astm.org

    Back to Top