If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM D7932 - 17

    Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments

    Active Standard ASTM D7932 | Developed by Subcommittee: D10.14

    Book of Standards Volume: 15.10

      Format Pages Price  
    PDF 8 $52.00   ADD TO CART
    Hardcopy (shipping and handling) 8 $52.00   ADD TO CART
    Standard + Redline PDF Bundle 16 $62.00   ADD TO CART

    1. Scope

    1.1 This specification provides a standard means to test and measure performance characteristics of printed, pressure-sensitive adhesive labels for containers, particularly containers to be used in extreme distribution environments (for example, hazardous materials labels, aerospace, military containers). For the purposes of this specification, an extreme distribution environment is one in which it can be reasonably expected to experience direct exposure to deteriorating chemicals, weather, elevated/cold temperatures, and other environmental and physical elements for an extended period of time.

    1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A666 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    D975 Specification for Diesel Fuel Oils

    D996 Terminology of Packaging and Distribution Environments

    D1000 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

    D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

    D3611 Practice for Accelerated Aging of Pressure-Sensitive Tapes

    D3951 Practice for Commercial Packaging

    D4332 Practice for Conditioning Containers, Packages, or Packaging Components for Testing

    D4814 Specification for Automotive Spark-Ignition Engine Fuel

    D6210 Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

    D6252/D6252M Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90 Angle

    G195 Guide for Conducting Wear Tests Using a Rotary Platform Abraser

    Department of Defense Standards

    MIL-DTL-83133 Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34), NATO F-35, and JP-8+100 (NATO F-37)

    MIL-STD-2073-1 Standard Practice for Military Packaging


    ICS Code

    ICS Number Code 55.040 (Packaging materials and accessories)

    UNSPSC Code

    UNSPSC Code 55121600(Labels)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D7932-17

    Citation Format

    ASTM D7932-17, Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments, ASTM International, West Conshohocken, PA, 2017, www.astm.org

    Back to Top