ASTM D7388 - 18
Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
| Format | Pages | Price | ||
 |
2 | $44.00 |  ADD TO CART |
|
 |
Hardcopy (shipping and handling) | 2 | $44.00 | ADD TO CART |
|
Standard + Redline PDF Bundle  |
4 | $52.00 | ADD TO CART |
Historical Version(s) - view previous versions of standard
More D15.07 Standards Related Products Standard References
Abstract
This specification covers engine coolant grade 1,3-propanediol (PDO). Engine coolant grade 1,3-propanediol shall conform to the chemical and physical property requirements specified. Density or relative density, color of clear liquids, pH, trace chloride ion, ion chromatography analysis, digital density meter, ethylene glycols and propylene glycols analyses, and inductively couple plasma-atomic emission spectroscopy tests shall be performed.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers engine coolant grade 1,3-propanediol (PDO).
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1122 Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1123 Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D1287 Test Method for pH of Engine Coolants and Antirusts
D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
D3634 Test Method for Trace Chloride Ion in Engine Coolants
D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D5827 Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
D5931 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
D6130 Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D7515 Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
E202 Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
E300 Practice for Sampling Industrial Chemicals
ICS Code
ICS Number Code 71.080.60 (Alcohols. Ethers)
UNSPSC Code
UNSPSC Code 25174004(Engine coolant)
Referencing This Standard
| Link Here | |||
| Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/D7388-18
Citation Format
ASTM D7388-18, Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO), ASTM International, West Conshohocken, PA, 2018, www.astm.org
Back to Top